433 Mhz Universal Wireless Remote Control Switch DC 12V 1CH Relay Receiver Module and RF Transmitter Electronic Lock Control Diy
-
Brand Name:joydeal
-
Origin:CN(Origin)
-
Current:5A
-
Features:domotica 433MHz 3V Car Door Lock Locking Vehicle Keyless Entry System
-
Material:ALLOY
-
Certification:CCC
-
Certification:ROHS
-
Certification:ce
-
Item Type:Switches
-
Warranty:1 year warranty 1 year warranty smart home remote control touch switch
-
Is Smart Device:No
-
Model Number:interruptor de luz micro push button wall smart remote control switch
-
Switch Type:Remote Control
-
Remote Distance:5 ~ 100 Meters for smart home interruptor touch switch DIY RF control
-
Wireless Communication:RF
-
Modulation Mode:ASK
-
PCB dimension:35*30*18mm
-
Quiescent Current:5mA
-
Working temperature:-30 - 80 degrees
-
Shell:Yes
-
Receiving Sensitivity:>97dbm
-
Application example:Light Switch Security Alarm System
-
RF working mode:superheterodyne 1527 learning code remote control switch
-
Output Terminal:NO COM NC
Technical Data Of Receiver:
Input Power:DC10V-14V
Standby Current:<5MA
RF Frequency:315M or 433M
RF working mode:superheterodyne
Receive sensitivity: >97dbm
Transmitting distance:>100m ( open space)
Decoding mode:MCU software decoding
Remote storage:25pcs
Support remote type: Learning code, Fixed code(Rolling code can be design)
Working mode:Momentary, Toggle, Latching Time delay (5s ,10s ,15s )
Wiring type:fixed terminal
Output Terminal :NO , NC , COM
Dimension of PCB:35*30*18mm (L,W,H)
Wiring diagram 1:
+V : 12V + input ;
- V: 12V - input ;
NO: Output , normal open;
COM:Output , common ;
NC: Output , normal close.
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects.
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned;
After clearing the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode.
Wait for a moment , the LED will be on, it comes into learning state.
Push the remote button , LED indicator on the receiver board will flash 3 times and then come off,
learning successfully.
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be on , it comes into learning state.
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully.
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode.
Wait for a moment , the LED indicator on the receiver board will be on,
Push the remote button A,
LED flash for 3 times.
Push the remote button B.
Led indicator flash for 3 times and then come off,
learning successfully.
A = ON , B = OFF.
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds.
Push the learning key on the receiver fifth time , the time delay for 10 seconds.
Push the learning key on the receiver sixth time , the time delay for 15 seconds.
The LED indicator will be off.
Push the remote button , LED flashes and off.
After 3 seconds , the LED indicator will be on again , learning successfully.
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost.
